PRODUCT
Product Information
- HOME
- Product Information
- EFP-RC Product CD data
EFP-RC Product CD data
Update History
Update content
Now compatible with Windows 11.
Update history
Product CD Ver.2.00
Now compatible with Windows 11.
Product CD Ver.3.22
RC-Downloader updated to Ver.3.00.00
Product CD Ver.3.21
RC-Downloader updated to support Windows 7 64-bit and Windows 8
Product CD Ver.3.20
EFP-RC F/W updated to 4.03.13
The release of Product CD Ver.3.19 has been discontinued.
Product CD Ver.3.19
EFP-RC F/W updated to version 4.03.12
Product CD Ver.3.18
EFP-RC F/W updated to version 4.03.11
RC-Downloader Windows Vista, 7 compatibility
Only 32-bit versions of Windows Vista and 7 are supported.
Also, it cannot be used with EHCI and OHCI USB standards.
Product CD Ver.3.17
Updated EFP-RC F/W to 3.05.07 and 4.03.07
Updated RC-Downloader to Ver.2.00.01
Product CD Ver.3.16
Updated EFP-RC F/W to 3.05.05 and 4.03.05
Fixed EFP-RC Y command Type Error:1201 bug
Product CD Ver.3.15
Correction of errors in the MS series board manual
Product CD Ver.3.14
Updated EFP-RC F/W version to Ver.3.05.01 and Ver.4.03.01
MCU type: Changed from 26 7545-9 (Qz 8byte) to 7545-7 Qz 8byte
Added MCU type: 30 7548-9 (Qz 4byte)
Added checksum addition command (a)
Converted Mot(s)/Hex files to Hxw files (excluding 4-bit and high-speed mode)
Product CD Ver.3.12
EFP-RC F/W version updated to Ver.3.05.00 and Ver.4.03.00
4-bit 4500 series QzROM serial input/output mode now supports higher speed
8-bit 38000/38D2,38D5 flash ROM serial input/output mode now supported
8-bit QzROM serial input/output mode now supports 8-bit tyte and 4-byte high-speed types
16-bit R8C/Tiny 1-wire high-speed baud rate (460,800bps) setting added
PBT execution lifetime counter function added
EFP-RC control software version updated to Ver.1.9
Product CD Ver.3.11
EFP-RC Upgraded F/W version to Ver.3.04.00 and Ver.4.02.00
Product CD Ver.3.10
Upgraded EFP-RC F/W version to Ver.3.03.01 and Ver.4.01.01
Product CD Ver.3.09
Upgraded EFP-RC F/W version to Ver.3.03.00 and Ver.4.01.00
Upgraded EFP-RC control software version to Ver.1.6
Product CD Ver.3.08
We have started distributing the EFP-RC Product CD data.
Product CD Folder Structure
Folder Structure on the EFP-RC Product CD
| Folder Name | Contents |
|---|---|
| Manual English | (PDF) EFP-RC Instruction Manual and Operation Manual (English) |
| Manual Japanese | (PDF) EFP-RC Instruction Manual and Operation Manual |
| Software | Contains the latest EFP-RC firmware and control software (Firmware, RC-Downloader, USB driver, 8bit QzROM Blank Data) |
| Support device list | (PDF) Stores each device list |
Product CD Data
| File Name | efp-rc_260721.zip |
|---|---|
| File Size | 55.0MB |
| File Format | ZIP Compressed File |
| EFP-RC F/W Version | Ver.4.03.13 |
| Download S/W Version - RC-Downloader - RC-Downloader11 |
Ver.4.00.00 *Please use this version if you are not using Windows 11. Ver.1.00.00.00 |
[Important Notes Regarding F/W Version 4.03.13]
- Users using versions 4.03.11 and 4.03.12 must upgrade.
It has been discovered that in version 4.03.11, the countermeasure for using VDD:3.3V in the 38Dx group below is not applied to some product types.
It has been discovered that a program error occurs when writing to the 8-bit QzROM in version 4.03.12.
*The firmware version of the EFP-RC can be displayed by pressing the "←" key while the EFP-RC menu is displayed.
- Added MCU type 36 R8C/LX-SLP
- Modified QzROM writing routine
A phenomenon was found where writing failures occurred when VDD was set below 3.3V during writing to the 38Dx group, so the writing routine was modified. Additionally, this modification reduces the writing speed to approximately 2/3 of the original speed.
[F/W Version 3.05.07 - Notes from 4.03.07]
- MCU Type Change
MCU Type 05: Changed R8C14-(1Line) to R8C/14-16(1Line)
MCU Type 31: Added R8C/3x, LX(Type1)
MCU Type 32: Added R8C/3x, LX(Type2)
MCU Type 33: Added R8C/2x (Type1)
MCU Type 34: Added R8C/2x (Type2)
MCU Type 35: Added R8C/2x (Type3)
【Y command Type Error: 1201 bug occurs. Target versions for fix】
- Users using the following versions must upgrade.
EFP-RC F/W:
- Version: 3.05.04 or earlier (Main unit serial No. xx00021 to No. xx00085)
- Version: 4.03.04 or earlier (Main unit serial No. xx00086 and above)
*The EFP-RC firmware version can be displayed by pressing the "←" key while the EFP-RC menu is displayed.
【F/W Version 3.05.01 - Notes from 4.03.01】
- MCU Type Change
MCU Type 26 7545-9 (Qz 8 Byte) has been changed to 7545-7 (Qz 8 byte).
MCU Type 30 7548-9 (Qz 4 byte) has been added.
- Checksum addition command (a) has been added.
- Mot(s)/Hex files have been converted to Hxw files (excluding 4-bit and high-speed mode files).
[Notes from F/W Version 3.05.00 4.03.00]
- Please note that the checksum calculation method for 8-bit QzROM has been changed as follows.
The method of skipping the protected address has been changed to adding "FFh".
7544-9 Group
385x Group
38Dx Group
[F/W Version 3.05.00 - Functional Changes and Additions from 4.03.00]
- 4-bit 4500 series QzROM serial input/output mode has been made faster.
Write time is reduced to approximately 1/3.
- 8-bit QzROM serial input/output mode has been made faster with 8-byte and 4-byte modes.
[F/W Version 3.04.07 - Functionality Changes and Additions from 4.02.07]
- Polar rate: 460,800bps can be set for 16-bit R8C/Tiny 1-wire system.
However, please note that this does not support R8C/10-1B group and R8C/24,/25 group (16KB, 32KB versions). (The upper limit is 115,200bps.)
- Added lifetime counter function for PBT execution.